patt www.vishay.com vishay dale thin film revision: 17-sep-13 1 document number: 60124 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 precision automotive high temperature (155 c at full rated power) thin film chip resistor, aec-q200 qualified the terminations consist of an adhesion layer, a leach resistant nickel barrier and gold plating compatible with high temperature solder systems. construction features ? resistance range: 2.75 ? to 120 k ? ? aec-q200 qualified, table 7f ? aec-q200 qualified, esd rated class 1c (2 kv) ? laser trimmed to any value ? intrinsic moisture prote cted resistor element ? moisture resistant to mil-std-202, method 106 ? tantalum nitride resistor film on alumina substrate ? 100 % visual inspected per mil-prf-55342 ? laser-trimmed tolerances to 0.1 % ? load life stability 0.2 % at 1000 h at 155 c and 100 % rated power ? very low noise and voltage coefficient ? (< - 30 db, < 0.1 ppm/v) ? sulfur resistant (per astm b809-95 humid vapor test) ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical performance note (1) storage temperature rating is for device only. adhesion layer high purity alumina substrate nickel barrier gold passivation t antalum nitride resistive film absolute tcr 25 tol. 0.1 standard electrical specifications test specifications conditions material tantalum nitride - resistance range 2.75 ? to 120 k ? - tcr: absolute 25 ppm/c to 100 ppm/c - 55 c to + 175 c tolerance: absolute 0.1 % to 1.0 % + 25 c stability: absolute 0.05 % 0.2 % at 1000 h at 155 c and 100 % rated power stability: ratio not applicable - voltage coefficient less than 0.1 ppm/v - working voltage 75 v - operating temperature range - 55 c to + 250 c - storage temperature range (1) - 55 c to + 250 c - noise < - 30 db - shelf life stability: absolute 100 ppm 1 year at 25 c component ratings case size power rating (mw) workin g voltage (v) resistance range ( ? ) 0603 150 75 2.75 to 120k
patt www.vishay.com vishay dale thin film revision: 17-sep-13 2 document number: 60124 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches case size l w t d e 0603 0.064 0.006 0.032 0.005 0.015 0.003 0.012 0.005 0.015 0.005 environmental tests environmental test conditions typical vishay performance high temperature storage mil-std-202 method 108, 1000 h at 125 c 0.05 % temperature cycling jesd22 method ja-104, 1000 cycles, - 55 c to + 125 c 0.115 % moisture resistance miil-s td-202 method 106 0.017 % biased humidity mil-std-202 method 103, 1000 h at 85 c, 85 % rh, 10 % rated power 0.133 % life mil-std-202 method 108, 1000 h at 155 c 0.20 % at 100 % rated power and 155 c. effective film temp erature is 200 c. mechanical shock mil-std-202 method 213, condition c 0.008 % vibration mil-std-202 method 204, 10 hz to 2 khz 0.008 % resistance to soldering heat mil-std-202 method 210, condition b 0.09 % electrostatic discharge aec-q200-002 at 2 kv, human body 0.10 % at 2 kv solderability mil-std-883 method 2003 para 2.3.1 and j-std-002 pass die shear mil-prf-55342,0.5 kg for 30 s pass flame retardance aec-q200-001 para 4.0 pass mechanical specifications resistive element tantalum nitride substrate material alumina terminations gold (10 in. min. ) over nickel ( 50 in. min.) derating curve d l e t w l dt ambient temperature c - 55 0250 0 20 40 60 80 100 percent of rated power 50 100 200 155
patt www.vishay.com vishay dale thin film revision: 17-sep-13 3 document number: 60124 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) characteristic tcr - ( r < 10 ? ) (2) preferred packaging code note (3) resistance values from 2.75 ? to 10 ? are undergoing ppap qualification; results are expected to be similar to ppap qualified 10 ? to 120 k ? . global part number information new global part numbering: patt0603e1002bst1 global model case size tcr characteristic resistance tolerance termination packaging patt 0603 e = 25 ppm/c h = 50 ppm/c k = 100 ppm/c (1) l = 200 ppm/c the first 3 digits are significant figures and the last digit specifies the number of zeros to follow. r designates the decimal point. example: 10r0 = 10 ? 1000 = 100 ? 1002 = 10 k ? b = 0.1 % d = 0.5 % f = 1.0 % g = 2.0 % j = 5.0 % g = wraparound ? gold over nickel ? barrier tape and reel t1 = 1000 min., 1000 mult (2) tf = full reel ts = 100 min., 1 mult resistance tcr (ppm/c) tolerance (%) 10 ? to 120 k ? 25, 50, 100, 200 0.1, 0.5, 1, 2, 5 5 ? to 10 ? (2) 100, 200 1, 2, 5 2.75 ? to 5 ? (2) 200 1, 2, 5 03e1 02b 0 0 gt 1 t pa 6 t
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
